Calibrators and liquid meters

Cannabis plants need an acidity level below the neutral PH. Depending on the stage of the life cycle at which they are, they will need a certain pH level or another, so it is not possible to give values which are valid for the whole life cycle of the crop.

In general, the PH during the growth phase needs to be established around 5.5 points of acidity. The reason? Because acidity around 5.5 favours the absorption of more nutrients than other values.

Furthermore, during the flowering stage, one of the most important stages in the life cycle of marijuana, the acidity should be set at around 6.0 and 6.5. In this way, these values help the plants to better absorb phosphorus and potassium, as these are the nutrients that are most needed for flower development.

In Experiencia Natural you can find calibration liquids for the PH meters very convenient for the grower. These liquids must be used frequently in order to maintain objective and accurate data.

In addition to liquids for calibrating acidity meters, there are also liquids for calibrating electroconductivity (EC) meters. The EC measures the electroconductivity of water, or in other words, the amount of nutrients present in the irrigation water or a nutrient solution.

Many growers do not attach enough importance to the electroconductivity, even though it is a fundamental value and especially important when making a nutrient solution for a hydroponic plant such as Cannabis.

The EC must be measured constantly, and having the meters well calibrated is vital, so that we can make accurate measurements to keep the plants in a perfect state of nourishment. This is achieved by calibrating the EC meters weekly with the EC calibration buffers.

In this section we also offer you tools to measure liquids, very useful to be able to add the correct amount of each of the fertilizers.

Liquid calibration and measurement

In this growshop you can find liquids to calibrate both EC and PH meters. This is the case of Hannah's electroconductivity calibration sachet. This is a 20 ml single-use pouch that is used to calibrate the meters and therefore provide reliable results.

Once a week, it is recommended to use this type of product to calibrate all the meters, so they can provide stable measurements.

Calibration and regulation liquids for pH and EC are necessary for both meters. They are an essential element to help the plants absorb nutrients optimally.

Pipettes and measuring cups are among the most important products for measuring liquid quantities. Two very simple products but totally indispensable for the grower.